BEAST Computers' ultimate Intel Core i7 machine

by Tarinder Sandhu on 7 November 2008, 17:44

Tags: Aphros Core i7, Beast Computers

Quick Link: HEXUS.net/qap36

Add to My Vault: x

The number of the BEAST


 




The third bottom-mounted radiator works in a similar fashion, too, sucking in air from the sides and blowing out of the bottom. The end result, says BEAST, is a cooling system that dissipates extreme amounts of heat from multiple heat sources in the same loop.



The pre-production system was specified with a couple of watercooled Radeon HD 4870 X2 cards in CrossFireX mode.

 




The CPU - in this case a Core i7 940 - will be overclocked when the machine launches later on this month.

Our brief testing with the system highlighted CPU temps hovering at around 50°C under load, which whilst good, isn't extraordinary.

Speaking to BEAST representatives, we learned that the CPU block was the first available for Core i7 processors. As such, we expect thermal performance to improve as a greater number of block manufacturers design for Core i7's revised dimensions.

We expect BEAST to replace the motherboard with a more enthusiast-friendly ASUS P6T Deluxe or Rampage II Extreme - opening up the possibility of specifying either a two-card Radeon HD 4870 X2 or three-card NVIDIA GeForce GTX 280 graphics setup.

Expect to see the system ship with a Core i7 running at over 4GHz, graphics cards pre-overclocked, and a slew of solid-state drives for ultimate performance.

Revision 2 and 3 of this PC will use higher-quality materials, we're told, and we wait to see it with bated breath.

The downside of having a custom-built PC - where you can probably choose which colour of cable-tie goes into the system - is price.

Equipped with a Core i7 probably operating at >4GHz; twin pre-overclocked Radeon HD 4870 X2s in CrossFireX; 6GB DDR3 RAM; 1.3TB's of mechanical-based storage; 1,100W PSU, LG Blu-ray drive; the complete watercooling kit; powdercoated case finish, and personal delivery, you're looking at little change from £6,000 - and that excludes monitor and peripherals. That's the price you pay for ultimate bespokeness, it seems, but it's manifestly out of the reach of most consumers.

Having tinkered with it for a day or two, we reckon that performance, once the full-retail model is released, will be about as good as money can buy. However £6k is an awful lot of money to spend, especially when 90 per cent of the performance can be purchased for less than half the asking price.

Most readers will guffaw at the price and label it insane. However, even in today's economic climate there remains a clique of folks with multiple thousands of pounds/dollars to spend on their hobbies. BEAST is targeting those people with systems like these. 

We'll know more of whether it can succeed in such a segment as we take a similar system in for full review in a couple of weeks' time.



HEXUS Forums :: 19 Comments

Login with Forum Account

Don't have an account? Register today!
While you've got it, can you do a mini-review of the KillerNIC pleeeeaaaaasse? Just for giggles. :P
looks beefy…if nothing else…gotta say that lol
this_is_gav
While you've got it, can you do a mini-review of the KillerNIC pleeeeaaaaasse? Just for giggles. :P

Why not.

I can still vividly remember being in Vegas and meeting the guys from Killer, who took product evangelism to a whole new level by wearing huge ‘K’ medallions around their necks at CES.

They were hard to miss, I'd give 'em that.
the quoted price of this is nothing short of disgusting..ya sure ppl expect a mark up for custom built systems, doubly-so for water-jobbies but 6g for s system which would cost less than 2.5g to build is just…wrong
shame on them for even trying to push that price
Guffaw!