PRESS RELEASE
Introduction
DAN Cases is back on Kickstarter! This time with an optimized version 2 of the A4-SFX and an optional Window Kit.
The A4-SFX is a project with the goal of creating the smallest PC case possible while still using high-end standardized components, such as Core i7 or Ryzen processors, and powerful full-length GPUs, such as the GeForce GTX 1080 Ti.
The result is a unique product that is much smaller than all other competing cases. This case is perfect for SFF (Small Form Factor) enthusiasts, those who need a highly portable system, developers who require a case with a smaller footprint due to limited desk space, and gamers who want a high-end PC experience in their living room.
What's new?
With the ambition to make our products as perfect as possible, we analyzed every review that was made with the A4-SFX and all feedback received from the first campaign. We improved six features for the next A4-SFX evolution:
How It Works
This case uses what we refer to as a sandwich hardware layout. Using a PCIe extender allows for the most prominent design feature of this case, which is the location of the GPU behind the motherboard. The A4-SFX comes with the highest quality PCIe extender on the market, made by 3M, which allows for PCIe Gen3 and Gen4 support.
The case allows for easy mounting of either SFX or SFX-L power supplies. The PSU is located in the front of the chassis.
Depending on the size of the PSU, up to two 2.5” HDDs or SSDs can be mounted in the drive bay. The drive bay is mounted with rubber spacers to reduce vibration and noise. A third 2.5" drive can be mounted behind the front cover.
Every component cools itself by getting fresh air directly from the outside. Hot air in the case will move to the top and then outside without the need of an extra fan. This principle works perfectly and results in amazing cooling efficiency compared to other cases.
GPUs without a protective backplate can safely be used in the case. A thin plastic film is installed to prevent electrical short with the aluminum chassis or the PSU.
With the new version of the A4-SFX you will be able to mount a 92mm fan or a 92mm All-In-One water cooling solution in place of the drive bay.
Case Specifications
- Case Dimensions: 200 x 112 x 317mm (H x W x D), 7.25L
- Overall Dimensions: 205 x 112 x 327mm (including feet and rear protrusions)
- Weight: 1.25 Kg
- Graphics Card: Dual-Slot up to 295mm length
- Motherboard: Mini-ITX
- Power Supply: SFX, SFX-L
- Drives: Up to 3 x 2.5" HDD/SSD
- Fan: 1 x 92mm fan in place of drive bay
- Front ports: 1 x USB 3.0 (internal 20-pin plug)
- Power button: Premium-grade button
- Material: 1.5mm aluminum brushed exterior
- Side Panels: Easily clippable with sturdy Lian Li Push Pin technology
- Colors: Anodized black or silver exterior, matte black painted interior
- PCIe Extender: Includes the 3M Twin Axial 300mm PCIe Gen3+ extender
Window Kit Specifications
The new A4-SFX Window Kit will give you the best view inside the A4-SFX. The design is a compromise between effective cooling and aesthetics. The cutout and the opening between the side panel and acrylic glass let the hardware breath. The Window Kit includes a panel for both sides. It is fully-compatible with the old and new version of the A4-SFX.
- Parts: Includes left and right window panel
- Dimensions: 200 x 9.5 x 317mm (H x W x D)
- Weight: 0.5 Kg
- Ventilation: 5mm opening between frame and acrylic glass + DAN logo cutout
- Mounting: Easily clippable with Lian Li Push Pin technology
- Material: 1.5mm brushed aluminum frame and 3mm acrylic glass
- Colors: Anodized black or silver frame and gray glass
- Compatibility: A4-SFX v1 & v2
- Note: Temperatures on CPU and GPU will be higher
Compatibility
CPU Coolers
- Max. height 48mm
- Max. height with Window Kit 54.5mm
- Note: Some heatsinks will also fit if used with a thinner fan
Water Cooling
- 92mm Water Cooling support - Asetek 545LC
Hard Disk Drives
- 2 x 2.5" HDD/SSD in drive bay: max. height 15mm
- 1 x 2.5" HDD/SSD in front-area: max. height 9mm
- Note: With SFX-L you are limited to one drive in the drive bay
Graphics Card
- Max. height from bottom of PCIe slot to top: 144mm
- Max. width without backplate: 40mm; including backplate: 45mm
- Max. length without bracket: 295mm; including bracket: 306mm
Motherboard Mini-ITX
Power Supply SFX and SFX-L
Memory
- Max. height: 52mm
- Max. height with Window Kit 58.5mm
Note: For more details visit the compatibility page!
Reviews
The A4-SFX was reviewed by tech sites. If you would like to take a deeper look into the tests, please visit DAN Cases for the links.
Partners
DAN Cases UG (haftungsbeschränkt) has partnered with the best in the industry for the A4-SFX. The all-aluminum body and the Window Kit will be manufactured by Lian Li in Taiwan per their highest quality standards. The PCIe extender will be supplied by 3M. The extender uses 3M's patented Twin Axial technology, and is widely recognized as the most reliable PCIe extender on the market. A commitment to quality lies at the core of our business philosophy.
Rewards
Orders will be limited to one reward. Only a second Kickstarter account will give you the option to gain further rewards. We will provide three reward tiers:
Kickstarter
The run-time for the campaign is 30 day. The Kickstarter campaign for the second version of the A4-SFX will have no quantity limits, but we don't have unlimited storage space so every charge will have a maximum quantity of 2000 cases. If the first 2000 rewards are sold we will add more rewards.
