It's all upside down, mon capitan..
Round the back of the TJ-09 we start to see just how the ventilation system on the sides has affected the interior layout. The PSU is demoted to the bottom rank, leaving a ventilation area directly above the CPU area.
A single 120mm fan is fitted to the back, with a simple chrome guard to protect wandering fingers.
Further down we have the pre-cut water cooling holes that are covered with simple pop-out plastic caps. The good news here is there is plenty of scope for using some fat tubing on the TJ-09; the holes themselves are pretty generous in size.
As mentioned earlier, the PSU section on the TJ-09 is located at the base of the chassis, and whilst it can only be mounted one way round for ATX formats, the chrome plate itself can be removed if you are fitting a redundant power supply solution.