EK®, premium liquid cooling gear manufacturer based in Slovenia, is introducing its new generation of high-performance water blocks specially designed for MSI Gaming X Trio GeForce® RTX™ series graphics cards, based on Turing® graphics processor. The block also features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via LEDs, visible from the side.
EK-Vector Trio RTX
The inspiration for the new GPU block name “Vector” came from the sheer computing power of the graphics cards that are on the market today. Naming a water block “Full Cover” isn’t enough these days, when the product is packed with unique features, such as these.
The EK Vector Trio RTX water blocks are specially designed for multiple MSI Trio GeForce RTX Turing based graphics cards. The water block itself uses the signature EK single slot slim look, and it covers the entire PCB length. This sophisticated cooling solution will transform your powerful MSI graphics card into a minimalistic, elegant piece of hardware with accented RGB LED lighting. The block also features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via LEDs, visible from the side.
The water block comes in two different models tailor-made for either MSI Gaming Trio 2080 and MSI Gaming Trio 2080 Ti cards including the Gaming X variants which are factory overclocked. Each of them directly cools the GPU, VRAM and the VRM (voltage regulation module) as cooling liquid is channeled directly over these critical areas. This allows the graphics card to remain stable at high overclocks, intensive workloads and also enables it to run at its maximum Boost Clock. Ultimately, you can enjoy gaming at the highest possible performance of your graphics card, stutter-free in a low noise environment.
The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-rings. The brass standoffs are already pre-installed and allow for a safe and easy installation procedure. It features four integrated LED sources, two located in the terminal cover and one LED strip on each end of the water block.
The water blocks are equipped with 12V RGB LEDs which are compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.
The newly developed water blocks feature the signature EK-Vector cooling engine that has a larger footprint compared to the previous generation of full cover water blocks. This results in a larger surface area for heat transfer which allows the increase of thermal performance of these water blocks.
The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restrictions, meaning it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.
EK-Vector Trio RTX 2080 Ti water blocks are compatible with MSI Gaming Trio GeForce RTX 2080 Ti graphics cards based on Turing graphics processors. Including the Gaming X – factory overclocked variants.
EK-Vector Trio RTX 2080 water blocks are compatible with MSI Gaming Trio GeForce RTX 2080 graphics cards based on Turing graphics processors. Including the Gaming X – factory overclocked variants.
EK-Vector Trio RTX series water blocks are compatible with the corresponding the EK-Vector Trio RTX backplates that passively cool the graphics chip and VRM from the back side of the PCB. The EK-Vector Trio RTX backplates are made of high-quality Aluminum and come in nickeled and anodized black variants. The EK-Vector Trio RTX series water blocks are not compatible with factory backplates.
The current multi GPU EK-Scalar Terminal connection bridges are compatible with these new water blocks. However, the EK-Vector GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.
EK-Vector Trio RTX Backplates
EK recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section. The backplates for MSI Gaming X GeForce RTX 2080 and MSI Gaming X GeForce RTX 2080 Ti cards are to be available in either Nickel Plated or Black Anozided variants.
Availability and pricing
The EK-Vector Trio RTX series water blocks and backplates are made in Slovenia, Europe and are available for pre-order through EK Webshop and Partner Reseller Network. Pre-orders for EK-Vector Trio RTX will start shipping on Friday, 12th of April, 2019. In the table below you can see the manufacturer suggested retail price (MSRP) with VAT included.
EK predicted MSRP prices including VAT:
|EAN Code||Name||End-user Price in EUR|
|3831109814581||EK-Vector Trio RTX 2080 Ti RGB - Nickel + Plexi||154,90|
|3831109814598||EK-Vector Trio RTX 2080 Ti RGB - Nickel + Acetal||149,90|
|3831109814659||EK-Vector Trio RTX 2080 RGB - Nickel + Plexi||154,90|
|3831109814666||EK-Vector Trio RTX 2080 RGB - Nickel + Acetal||149,90|
|3831109816219||EK-Vector Trio RTX 2080 Backplate - Nickel||47,90|
|3831109816202||EK-Vector Trio RTX 2080 Backplate - Black||39,90|
|3831109816875||EK-Vector Trio RTX 2080 Ti Backplate - Nickel||47,90|
|3831109816868||EK-Vector Trio RTX 2080 Ti Backplate - Black||39,90|